OUR UNIQUE VALUE ADD TO THE FABRICATION PROCESS

Taking your new office or remodel from concept to reality has a few very important steps.

#1). Figuring out your exact needs for the space (i.e. how your customers move about the space, your preference for location and size of exam rooms, and even how large you want the break room to be!).

#2). The design process, to decide on the look, feel, and function of your office. Not sure how to make that decision? Lucky for you we have an easy how to guide for reference! Click here for How to Start the Design Process.

#3). Last but not least, the main attraction of this post… THE FABRICATION AND BUILD OUT STAGE!

Not to toot our own horn, but there are a number of elements that truly set Ennco apart from our peers including but not limited to our years of experience in the industry, our use of the most advance technology, and finally our quality and attention to detail.

Industry Specific Experience

Would you hire a plumber to build you a house? NO…so why would you hire a local casework builder to create your optical space?

Every city in the country has at least one local builder and in many cases they are very good at what they do.  What they do, however, isn’t designing and building successful Optometry and Ophthalmology spaces. Your typical casework builder does a mix of local projects from kitchens in private homes to commercial cabinets in schools or government buildings. However, in optical spaces there are a very unique set of needs associated with the build and design. Our high level of experience in the industry allows us to make your space work like a dream!  We’ve heard many accounts of someone using the local cabinet/millwork provider only to discover there are horrible flaws in the logic used to build the space (i.e. work surfaces too high, frames displayed too low, low end materials used in an  industrial grade setting etc…).  What works in a kitchen will not carry over to a smooth running and profitable optical dispensary.  So we pride ourselves on the ability and know-how specific to the optical industry…no “faking it till you make it here”.

Most Advanced Technology

Nearly every machine in our fabrication shop is CNC (computer) controlled, meaning we can fabricate exactly what was drawn during the design process… cool huh?!? This ability allows us to really step outside the box and create truly custom displays that couldn’t be built by just anyone. Our computer rich environment means that we have fewer fabricators in our shop than many of our competitors.  Our small team is able to see each and every project from “cradle to grave” and we take a huge amount of pride in the quality of the finished product.  In a huge, labor rich factory any given employee may only see a tiny part of the puzzle but never actually see the finished product, at Ennco that’s just not our style!

High Quality and Unprecedented Attention to Detail

Remember the really cool CNC machines we talked about earlier? Yea…well the REALLY cool thing is they allow us to build casework and displays with an amazing amount of accuracy! We’ve removed the chance for human error in nearly every step of the building process which allows the fabricators to keep an extra close eye on the quality of the finished product and avoid costly mistakes. All of our casework is built above the standards for AWI cabinetry. We use thicker and stronger materials than most shops so the pieces you buy will last until you want to change them out rather than need to. It’s not uncommon to hear of spaces we’ve built that have been unchanged for 20 years. We also dowel and screw all of our casework and don’t use staples or nails on anything we build. This is a much more difficult way to build things but the quality of the finished product is second to none.

We hope you enjoyed this quick glimpse into the Ennco shop! Check back later for more posts like this and much more.

Leave a Reply

Your email address will not be published. Required fields are marked *